Description

ESP Panels in Clear extends the life of panel products by creating a watertight seal around the edge of the boards, stopping moisture penetration to protect against delamination and warping. Ideal for external use and high humidity areas. ESP is proven to make plywood, MDF, OSB and sterling board last longer. The sealant is simple applied to the bare edges (including freshly cut edges) of the boards. A thick layer is painted down the edge with a 5mm overlap onto the flat surface. Ensure that any holes or air pockets are completed covered. This can be done by working the sealant along the edge, back and forth with a paint brush.

Ideal for:
• Plywood
• OSB
• MDF
• Sterling Board

Features:
• Easy Application
• Quick Drying
• Stabilizes plywood from warping
• Stops water ingress and delamination
• Reduces risk of mould and rot
• Proven to make plywood stronger

Coverage:

Panel Thickness	1 litre will seal	Total cut edge
18 mm	21 sheets	183 metres
12 mm	32 sheets	234 metres
9 mm	37 sheets	270 metres

Advice:
Ensure that all areas to be sealed are clean, free of dust, mud, and ‘muck’. If necessary, clean the surface thoroughly with clean water and allow to dry.
For optimum results ensure that the plywood is clean and dry before application.

A thick layer is painted down the edge with a 5mm overlap onto the flat surface (see insert). Ensure that any holes or air pockets are completed covered. This can be done by working the sealant along the edge, back and forth with a paint brush.

• For best results use a woodwork stain and varnish brush for an even finish.
• Can be applied by roller: recommended a minimum of a medium pile roller sleeve.

Drying Time:
Touch dry within 2 hours depending on drying conditions and humidity.