Environmentally Friendly
Free delivery over £30*
Made in the UKCoverage Calculator (Imperial Measurements)
Measurements: Imperial / Metric *
Project
Fencing - Small Gardens
Dimensions
(6’ x 2'), 3 Panels
(6’ x 3'), 2 Panels
(6’ x 4'), 2 Panels
(6’ x 5'), 1 Panel
(6’ x 6'), 1 Panel
Amount
1 Litre
Recommended Products
Project
Fencing - Large Gardens
Dimensions
(6’ x 2'), 16 Panels
(6’ x 3'), 12 Panels
(6’ x 4'), 9 Panels
(6’ x 5'), 7 Panels
(6’ x 6'), 6 Panels
Amount
5 Litre
Recommended Products
Project
Sheds
Dimensions
(6’ x 4’)
(6’ x 5')
(6’ x 6’)
(7’ x 5’)
(7’ x 6’)
(7’ x 7’)
(8’ x 6’)
(8’ x 7’)
Amount
5 Litre
Recommended Products
Project
Stables
Dimensions
(12’ x 12’)
Amount
10 Litres
Recommended Products
Project
Timber Buildings
Dimensions
(10’ x 6’)
(10’ x 7’)
(10’ x8’)
(12’ x 8’)
(12’ x 10’)
(16’ x 8’)
(16’ x 10’)
Amount
5 Litres
Recommended Products
Project
Timber Buildings - Large
Dimensions
(16’ x 12’)
(20’ x 10’)
Amount
15 Litres
Recommended Products
Project
Table & Chairs - Small Set
Dimensions
2 chairs & small table
Amount
1 Litre
Recommended Products
Project
Table & Chairs - Large Set
Dimensions
4 chairs and large table
Amount
2.5 Litres
Recommended Products
Project
Bench
Dimensions
Most Sizes
Amount
1 Litre
Recommended Products
Project
Arbor
Dimensions
Standard
Amount
2.5 Litres
Recommended Products
Project
Planter/Arch
Dimensions
Standard
Amount
1 Litre
Recommended Products
Project
Trellis/Obelisk
Dimensions
Standard
Amount
1 Litre
Recommended Products
Project
Gate
Dimensions
Small to Medium
Amount
1 Litre
Recommended Products
Project
Gate
Dimensions
Large e.g. 9' x 9'
Amount
2.5 Litres
Recommended Products
Project
Masonry
Dimensions
80sq ft
Amount
1 Litre
Recommended Products
Untreated or Pressure Treated Wood
We recommend our WOOD PRESERVATIVE ++ on untreated timber as a primer, if your timber is pressure treated or has been previously treated then there is no need to apply. Coverage based on 2-3 coats is 5m2 per litre.
Use our STAIN BLOCKING PRIMER if you are treating new or newly pressure treated timber and the top coat you are using is a light white containing colour. This will reduce the risk of tannins or the pressure treatment chemicals staining the top coat. Coverage is 5-10m2 depending on 1 or 2 coats applied.
Recommended Products
* Based on 2 coats. These are approximations to be used as a general guide with some providing leftovers.
