Royal Metallic Wood Finish

An addition to our illustrious Royal range are shimmering Metallics. This high quality decorative coating is suitable for use on wood, plastic and metal. It is a high build formula so each coat will give enhanced luster. This is perfect for use inside and out to add and touch of shimmer to your living spaces.

Royal Metallics is a high-grade water-repelling timber treatment that contains a mould inhibitor to protect the coating. It is perfect for use on all softwood and hardwood products such as windows, doors, conservatories, summerhouses, gates, cladding and garden furniture. This hard-wearing coating can be used on horizontal and vertical surfaces. Royal Metallics are low in odour and with low VOC (volatile organic compounds). The unique formulation is a water-based acrylic and alkyd hybrid that incorporates a polyurethane dispersion based on linseed oil - a renewable resource

Shop Range

Application Guide

Download PDF

Health & Safety

A 1 litre tin will cover approximately 8m2 depending on moisture content and porosity of the timber. It is recommended that 2 coats be applied with a 3rd coat if a deeper colour density is required. Royal Metallics are a high build formulation so each extra coat increases the shimmer and shine. No primer or basecoat required. If applying to bare timber a knotting agent or stain blocking primer should be applied prior to Royal to prevent any possible resin bleed staining the coating.

Finish

Satin with sheen and shimmer increasing with further coats

Lifespan

2 – 5 years depending on levels of wear & tear + exposure

Coats

2 coats with a 3rd increasing the colour density

Coverage

Approx. 6 – 10m2 per litre per coat. Coverage rates for 1st coat and rough-sawn timber will be at the lower end

Apply By

Brush, Roller or Low Pressure Spray Gun

Drying Time

Touch-dry in 2 hours in normal weather. Allow approx. 2-4 hours before applying 2nd coat if conditions are clear and dry. Drying time will be far longer in cold humid conditions

VOC & Odour

Low

Suitable For

Hardwood & Softwood Vertical & Horizontal surfaces
Planed & Rough-Sawn timber
Conservatories; Windows & Doors; Summerhouses; Gates;
Log Cabins; Furniture; Joinery & Cladding
Interior wood
Metal, terracotta, stone and some plastic